INTRODUCTION
90-892133 JULY 2003 Page 1-3
Keypad Usage
REMOTE LOCATION – ELECTRONIC THROTTLE AND SHIFT MODELS
1
2
3
Console Remote Control – Single
Panel Remote Control
4
7
6
5
4
1
2
3
Console Remote Control – Dual
Console Remote Control
1. Arrow Trackpad – Can be used to operate the up and down and side to side movement for
System View on-screen function promps.
2. Select Key – Can be used to select System View on-screen options and confirm data
entries. Pressing the Select switch for 2 seconds will return the System View display
back to the Home page.
3. Neutral LIGHT – The neutral light is illuminated when the engine is in neutral gear posi-
tion. The light blinks when engine is in warm up mode.
4. Active LIGHT – The active light is illuminated to show the remote control is active and
ready for use
5. Sync LIGHT – The sync light is illuminated when the auto synchronizing feature is en-
gaged. The auto synchronizing will automatically engage when both engines are above
900 RPM for 2 seconds and the throttles are within 10% of each other. The auto synchro-
nizing will operate up to 95% throttle opening. The auto automatically engages as soon
as the engines meet these conditions.
Panel Remote Control
6. Scroll Key – Can be used to scroll through System View displays on the display screen.
7. Select Key – Can be used to select System View on-screen options. Pressing the Select
switch for 2 seconds will return the System View display back to the Home page.
To Next Page
Loading...
General