GETTING STARTED
Page 2-4 90-892133 JULY 2003
Display Screens
Home Page Screen (Continued)
The top half of the home page displays engine data and vessel data. The engine data is
received from sensors on the engine and the vessel data is received by vessel sensors.
The initial screen layout takes one of two forms depending on whether one or two engines
are installed. Defaults for the engine data include engine RPM and engine temperature. De-
fault for vessel data is water depth.
The data displays can be selected by the user to display the functions. Refer to “Settings/
Preferences/Home Page Data” Menu in Section 6.
SINGLE ENGINE DISPLAY
TWIN ENGINE DISPLAY
2
3
4
5
2
11
3
45
RPM
H20 PSI
ENG TEMP
Oil PSI
Oil TEMP
FUEL FLOW
VOLTS
SPEED
DEPTH
FUEL LEVEL
RANGE
AIR TEMP
SEA TEMP
DTW
COG
SOG
BTW
COG/BTW
2
3
1
6
RPM
H20 PSI
ENG TEMP
Oil PSI
Oil TEMP
FUEL FLOW
7
1-Engine Line 1 – Refer to Section 6 for selection
2-Engine Line 2 – Refer to Section 6 for selection
3-Vessel Data – Refer to Section 6 for selection
4-Engine gear position or run arrow
5-Clock – Refer to Section 6 for setting
6-Flashing Bell Icon – Warning alarm is activated
7-Flashing Fuel Icon – Low fuel alarm
To Next Page
Loading...
General