Section 1 - Getting to Know Your Power Package
90-8M0114081 eng DECEMBER 2015 Page 5
Controls
Switches
Four‑Position Key Switch
•
"OFF" ‑ In the "OFF" position, all electrical circuits are off. The engine will not operate with
the key switch in the "OFF" position.
•
"ACC" ‑ In the "ACC" position, any accessories connected to the electrical circuits can be
operated. The engine will not operate with the key switch in the "ACC" position.
•
"ON" ‑ In the "ON" position, all electrical circuits and instrumentation receive power. The
engine can be started with an optional start‑stop switch.
•
"START" ‑ Turn the key to the start position and release to start the engine.
NOTE: The key can only be removed with the key switch in the "OFF" position.
Dual‑Engine Start‑Stop Switch
A start‑stop switch is optional equipment. The start‑stop switch works in conjunction
with the key switch. There is one start‑stop switch for each engine. Each button on a
multi‑engine start‑stop switch functions independently. The key switch must be in the
"ON" position to start a stopped engine with the start‑stop switch. Pressing a
start‑stop switch button when an engine is running will shut down the corresponding
engine.
Bilge Blower Toggle Switch
Operates the bilge blower, if equipped.
To Next Page
Loading...
Need help?
General