EasyManuals Logo
Home>Mercury>Outboard Motor>XR2

Mercury XR2 User Manual

Mercury XR2
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
13
GENERAL INFORMATION
Selecting Accessories For Your Outboard
Genuine Mercury Marine Quicksilver Accessories have been specifi-
cally designed and tested for your outboard.
Mercury Marine Quicksilver accessories are available from Mercury
Marine dealers.
Some accessories not manufactured or sold by Mercury Marine are
not designed to be safely used with your outboard or outboard oper-
ating system. Acquire and read the installation, operation, and main-
tenance manuals for all your selected accessories.
WARNING
!
Check with your dealer before installation of accessories. The
misuse of acceptable accessories or the use of unacceptable
accessories can result in serious injury, death, or product fail-
ure.
obk1
Safe Boating Suggestions
In order to safely enjoy the waterways, familiarize yourself with local
and other governmental boating regulations and restrictions, and
consider the following suggestions.
Use flotation devices. Have an approved personal flotation device
of suitable size for each person aboard (it is the law) and have it
readily accessible.
Do not overload your boat. Most boats are rated and certified for
maximum load (weight) capacities (refer to your boat capacity plate).
If in doubt, contact your dealer or the boats manufacturer.
Perform safety checks and required maintenance. Follow a regu-
lar schedule and ensure that all repairs are properly made.
(continued on next page)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury XR2 and is the answer not in the manual?

Mercury XR2 Specifications

General IconGeneral
MODELXR2
Horsepower180 (134kw)
Propshaft Kilowatts1194
Full Throttle RPM Range6000-7000
Idle RPM in Forward Gear650-750
Maximum Timing25° BTDC
Idle Speed Pickup Timing2° ATDC
Gear Ratio1.87:1
Piston Displacement122 cu. in. (2.0L/1998cc)
Bore3.125 in. (79.5 mm)
Stroke2.65 in. (67 mm)
Firing Order1-2-3-4-5-6
Recommended Spark PlugNGK-BUHW (P/N 33-97180)
Fuel Pressure5 - 6 psi
Recommended GasolineRefer to Fuel Section
Recommended OilRefer to Fuel Section
Recommended Gear Case OilQuicksilver Hi-Performance Gear Lube (92-816026A4)
Gear Case Lubricant Ca- pacity22.5 fl. oz. (666 ml)
Charging System Output16 amps @ 7000 RPM
Battery RatingMinimum reserve capacity rating of 100 minutes and CCA of 350
Water Pres. @ WOT15 PSI (103.4 kPa)
Weight and Dimensions IconWeight and Dimensions
Weight350 lbs. (159 kg)
Transom HeightShort Shaft = 15” (381mm) Long Shaft = 20” (508mm)

Related product manuals