Mercury XR2 User Manual

43
MAINTENANCE
Fuel System
WARNING
!
Avoid serious injury or death from gasoline fire or explosion.
Carefully follow all fuel system service instructions. Always
stop the engine and DO NOT smoke or allow open flames or
sparks in the area while servicing any part of the fuel system.
Before servicing any part of the fuel system, stop engine and discon-
nect the battery. Drain the fuel system completely. Use an approved
container to collect and store fuel. Wipe up any spillage immediately.
Material used to contain spillage must be disposed of in an approved
receptacle. Any fuel system service must be performed in a well ven-
tilated area. Inspect any completed service work for sign of fuel leak-
age.
FUEL LINE INSPECTION
Visually inspect the fuel line and primer bulb for cracks, swelling,
leaks, hardness, or other signs of deterioration or damage. If any of
these conditions are found, the fuel line or primer bulb must be re-
placed.

Mercury XR2 Specifications

General

MODEL	XR2
Horsepower	180 (134kw)
Propshaft Kilowatts1	194
Full Throttle RPM Range	6000-7000
Idle RPM in Forward Gear	650-750
Maximum Timing	25° BTDC
Idle Speed Pickup Timing	2° ATDC
Gear Ratio	1.87:1
Piston Displacement	122 cu. in. (2.0L/1998cc)
Bore	3.125 in. (79.5 mm)
Stroke	2.65 in. (67 mm)
Firing Order	1-2-3-4-5-6
Recommended Spark Plug	NGK-BUHW (P/N 33-97180)
Fuel Pressure	5 - 6 psi
Recommended Gasoline	Refer to Fuel Section
Recommended Oil	Refer to Fuel Section
Recommended Gear Case Oil	Quicksilver Hi-Performance Gear Lube (92-816026A4)
Gear Case Lubricant Ca- pacity	22.5 fl. oz. (666 ml)
Charging System Output	16 amps @ 7000 RPM
Battery Rating	Minimum reserve capacity rating of 100 minutes and CCA of 350
Water Pres. @ WOT	15 PSI (103.4 kPa)

Weight and Dimensions

Weight	350 lbs. (159 kg)
Transom Height	Short Shaft = 15” (381mm) Long Shaft = 20” (508mm)