Chapter II
20 Portable digital multimeters
1.7. Maintenance and metrological verification
Any adjustment, maintenance or repair work carried out on the multimeter while it is
live should be carried out only by appropriately qualified personnel, after having
taken into account the instructions in this present manual.
A "qualified person" is one who is familiar with the installation, construction and
operation of the equipment and the hazards involved. He is trained and authorized to
energize, de-energize circuits and equipment in accordance with established
practices.
Repair within or outside the warranty
Return your instrument to your distributor for any work to be done within or outside
the warranty.
1.8. Unpacking - Repacking
All the equipment was verified mechanically and electrically before shipping.
When you receive it, carry out a quick check to detect any damage that may have
occurred during transport. If necessary, contact our sales department immediately
and register any legal reservations with the carrier.
In the event of reshipping, it is preferable to use the original package.
To Next Page
Loading...
Need help?
General
