Chapter II
28 Digital Earth Tester
1.2. Warranty
This equipment is guaranteed against material faults or defective manufacture, in
compliance with the general sales conditions. It is supplied with a verification certificate
issued by our authorised laboratories.
During the warranty period (12 months), the instrument may only be repaired by the
manufacturer, who reserves the right to repair the instrument or to exchange all or part of
it. If the equipment is returned to the manufacturer, the outgoing transport costs are
borne by the customer.
The warranty is not applicable in the following cases:
1. improper use of the equipment or use of it in conjunction with incompatible equipment;
2. modifications to the equipment without the explicit authorisation of the manufacturer's
technical department;
3. work carried out on the instrument by a person not approved by the manufacturer;
4. adaptation for a specific application, not included in the definition of the equipment or the
user's manual;
5. shock, fall or water damage.
1.3. Repair and metrological verification
To have your instruments checked and calibrated, please consult our COFRAC approved
laboratories.
Repairs
For all repairs under guarantee or outside guarantee, please return the device to your
distributor.
1.4. Cleaning
Clean the instrument with a damp cloth and soap. Never use abrasive products or solvents.
Wipe and leave to dry completely before using.
A periodic verification is necessary, as for all measurement or test
instruments.
To Next Page
Loading...
Need help?
General
