Manual operation can be used temporarily in case the remote controller is disable or
the unit requires maintenance.
OPERATING INSTRUCTIONS
Manual operation
NOTE: This manual does not include Remote Controller Operations, see the
<<Remote Controller Instruction>> packed with the unit for details.
Operating temperature
Open and lift the front panel up to an angle
until it remains fixed with a clicking sound.
For 24K Btu model, please use suspension
bars to prop up the panel.
Once you push the manual button, the
operation mode is shifted in an order as:
AUTO, COOL, OFF. (The default setting
temperature is 24
Close the panel firmly to its original
position.
This is used for testing purposes only.
To restore the remote controller operation,
use the remote controller directly.
CAUTION:
1
3
2
Manual control
button
AUTO/COOL
Suspension bars
AUTO/COOL
1
2
Manual control
button
Mode
Cooling operation
Heating operation
Drying operation
Temperature
1. Optimum performance will be achieved within these operating temperatures.If air
conditioner is used outside of the above conditions, certain safety protection features
might come into operation and cause the unit to function abnormally.
2. Room relative humidity less than 80%. If the air conditioner operates in excess of this
figure, the surface of the air conditioner may attract condensation. Please sets the vertical
air flow louver to its maximum angle (vertically to the floor), and set HIGH fan mode.
Room temperature
Outdoor temperature
NOTE:
17 32
62 90
0 30
32 86
-7 24
20 76
18 43
64 109
-7 43 20 109
( For the models with low
temperature cooling system
18 52 64 126
(For special tropical models)
10 32 50 90
(For special tropical models)
11 43 52 109
18 52 64 126
5
To Next Page
Loading...
Need help?
General
