ADJUSTING AIR FLOW DIRECTION
Adjust the air flow direction properly. Otherwise, it might Cause un
comfort and make the room
temperature uneven.
Adjust the horizontal air
flow louver by using the
remote Controller.
Adjust the vertical air flo
w grilles manually.
When the air conditioner is operating the horizontal air flow louver may be adjusted to changed
the airflow direction as you like.
To automatical
ly swing
the air f
low direc
tion
Push the
SWING button, horizontal
louver sw
ings
automatically.
The lover will clo
se automatically w
hen the air
conditioner stops.
Adjust the horizontal air flow direction
Hold
CAUTION
The SWING button
will be disabled when the air conditioner is not in operation.
Do not set the open
angle of horizontal louver too small, otherwise, it will affec
t the cool or
heat effect because of little outlet.
Do not move the ho
rizontal louver manually. If you move the louver manu
ally, it may cause
malfunction, stop t
he air conditioner a
nd restart.
Do not set the open
angle of horizonta
l louver too small. Otherwise, condens
ation may
occur on the surface of the horizontal l
ouver and it cause
dew dripping.
When the air conditioner is started imm
ediately after it was
stopped, the horizontal louver
might not move For
10 seconds or so.
When the air condi
tioner is operating, the vertical
louver may be adjusted to change the horizontal
air flow.
1. Move the handle
outlet left side (or right side) by
hand.
Adjust the vertical air flow grilles to desired dire-
ction to change v
ertical air flow direction.
To Next Page
Loading...
Need help?
General
