Midea Aqua thermal Super Series User Manual

Aqua thermal Super
26
Midea Aqua thermal Super Service Manual
6 Protection Control
6.1 High Pressure Protection Control
This control protects the refrigerant system from abnormally high pressure and protects the compressor from transient spikes in
pressure.
Notes:
1. P
c
: Discharge pressure
Notes:
1. P
e
: Suction pressure
6.3 Discharge Temperature Protection Control
This control protects the compressor from abnormally high temperatures and transient spikes in temperature.
When the discharge temperature rises above 115°C the system displays P0 protection and all the units stop running. When the
discharge temperature drops below 90°C, the compressor enters re-start control.
P
c
> 4.3MPa
P
c
< 3.2MPa
Normal operation
High pressure protection, error code P0 is displayed
When P0 protection occurs 3 times in
60 minutes, a manual system restart is
required before the system can
resume operation.
P
e
< 0.05MPa
P
e
> 0.15MPa
Normal operation
Low pressure protection, error code P1 is displayed
When P1 protection occurs 3 times in
60 minutes, a manual system restart is
required before the system can
resume operation.
Discharge temperature > 115°C
Discharge temperature < 90°C
Normal operation
High discharge temperature protection, error code P0 is displayed
When P0 protection occurs 3 times in
60 minutes, a manual system restart is
required before the system can
resume operation.
MBT Confidential
pressure.
This control protects the refrigerant system from abnormally low pressure and protects the compressor from transient drops in
6.2 Low Pressure Protection Control
discharge pressure drops below 3.2MPa, the compressor enters re-start control.
When the discharge pressure rises above 4.3MPa the system displays P0 protection and unit stop running. When the

Midea Aqua thermal Super Series Specifications

General

Brand	Midea
Model	Aqua thermal Super Series
Category	Heat Pump
Language	English