Midea COMBI Series User Manual

Service Manual_2018-V2.0
37
9.3 Sensor replacement
Ambient temperature sensor
The sensor is located in the main control board
installation box and sends temperature signal to
microprocessor.As the sensor connected to the main
wire, if you need to replace, you must cut the wire.
Defrost sensor in refrigerating chamber
The defrost sensor is located on top of the evaporator.
1）Disconnect the connector of defrost sensor
2）Cut off the band which fixes the sensor.
3）Separate the sensor and the evaporator.
Sensor replacement guidelines
Cut off the damaged head of sensor.
Strip off the sensor wiring.
Take out a new sensor to cut the head of sensor.
(Spare parts code：11201007000795) Its technical
specifications apply to all MIDEA refrigerators.

Midea COMBI Series Specifications

General

Brand	Midea
Model	COMBI Series
Category	Refrigerator
Language	English