Midea CR034-RG36F Remote Control Manual

Model
Rated Voltage
8m (when using 3.0 voltage, up to 11m)
3.0V (Dry batteries R03/LR03 X 2)
Remote Control Specifications
1. Operating Mode: AUTO, COOL, DRY, HEAT, and FAN.
2. Timer Setting Function within 24 hours.
O O
3. Indoor Setting Temperature Range: 17 C ~ 30 C
4. Full function of LCD (Liquid Crystal Display).
Environment
Signal Receiving
Range
Performance Feature
3 4
RG36F3/BG(C)EF
O O
-5 C ~ 60 C
NOTE
Function button designs illustrated may differ slightly from the model you
actually purchased, depending on individual models.
All the functions described are accomplished by the indoor unit, but if your
particular unit does not have a particular feature, there will be no
corresponding operation when relative button on the remote control is
pressed.
1
2
4
5
3
9
10
8
6
7
11
12
13
14
15
TURBO
SELF
CLEAN
SLEEP
FRESH
SILENCE
FP
TIMER
ON/OFF
INTEL LIGENT
EYE
LOCK
RESET
LED
FOLLOW
ME
FAN
SPEED
SWING
MODE
TEMP
ON/OF F
SWING
Function Buttons
1
2
Each time the button is pressed, the operation
mode is selected in a sequence of following:
3
MODE Button
4
5
ON/OFF Button
Operation starts when this button is pressed
and stops when this button is pressed again.
NOTE: Heat mode is for Cooling & Heating models only.
AUTO COOL
DRY HEAT FAN
NOTE: While the unit is running under SLEEP
mode, it would be cancelled if the MODE, FAN
SPEED or ON/OFF button is pressed.
6
Press to activate/disable SLEEP function. If
pressed for more than 2 seconds the FRESH
function will be activated. Pressing once
again for more than 2 seconds will disable
the FRESH function.
SLEEP/FRESH Button
Swing Button
Swing Button
Used to stop or start horizontal louver
movement or set the desired up/down air flow
direction. The louver changes 6 degrees in
angle with each press. If pressed for more
than 2 seconds, the louver will swing up and
down automatically.
Press to activate/disable TURBO function. If
pressed for more than 2 seconds, the SELF
CLEAN function will be activated. Pressing
again for more than 2 seconds will disable
the SELF CLEAN function.
TURBO/SELF CLEAN Button
Used to stop or start vertical louver movement
and set the desired left/right air flow direction.
The vertical louver changes 6 degrees in angle
with each press and the temperature display
area of indoor unit displays for one
second. If pressed for more than 2 seconds,
the vertical louver swing feature is activated
and the display area of indoor unit displays ‘IIII’
flashes four times, then the temperature
setting reverts back. If the vertical louver
swing feature is stopped, it displays ‘LC’ and
remains on for 3 seconds.
,
,

Midea CR034-RG36F Specifications

General

Brand	Midea
Model	CR034-RG36F
Category	Air Conditioner
Language	English