Midea CR034-RG36F Remote Control Manual

11
12
When you select the Timer Operation, the remote control automatically transmits
the timer signal to the indoor unit for the specified time. Therefore, the remote
control must be kept in a location where it can transmit the signal to the indoor
unit properly.
The effective operation time set by the remote control for the Timer Function is
limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5,
6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, in half hour increments, then 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23 and 24 in one hour increments.
CAUTION
!
Example of timer setting
Start
Off
6 hours later
(Auto-On Operation)
The TIMER ON feature is useful when you want
the unit to turn on automatically before you
return home. The air conditioner will
automatically start operating at the set time.
To start the air conditioner in 6 hours.
1. Press the TIMER ON/OFF button to show
‘TIMER ON’. The last setting of starting
operation time and the signal ‘H’ will show
on the display area.
2. Press the +/- buttons to display ‘6:0H’ on the
TIMER ON display of the remote control.
3. Wait for 3 seconds and the digital display
area will show the temperature again. The
‘TIMER ON’ indicator remains on and this
function is activated.
TIMER ON
Example:
Set
TIMER ON
Stop
On
Set 10 hours later
(Auto-Off Operation)
The TIMER OFF feature is useful when you want the
unit to turn off automatically after you go to bed. The
air conditioner will stop automatically at the set time.
To stop the air conditioner in 10 hours.
1. Press the TIMER ON/OFF button to show
‘TIMER OFF’. The last setting of stopping
operation time and the signal ‘H’ will show
on the display area.
2. Press the +/- buttons to display ‘10H’ on the
TIMER OFF display of the remote control.
3. Wait for 3 seconds and the digital display area
will show the temperature again. The ‘TIMER
OFF’ indicator remains on and this function is
activated.
TIMER OFF
Example:
On
Stop
2 hours later
after setting
Set
To stop the air conditioner 2 hours after setting and
start it again 10 hours after setting.
1. Press the TIMER ON/OFF button to display
‘TIMER OFF’.
2. Press the +/- button to display 2.0H on the
TIMER OFF display.
3. Press the TIMER ON/OFF button to display
TIMER ON.
4. Press the +/- button to display 10H on the
TIMER ON display .
5. Wait for 3 seconds and the digital display area
will show the temperature again. The ‘TIMER
ON OFF’ indicator remains on and this function
is activated.
TIMER OFF TIMER ON
(On Stop Start operation)
This feature is useful when you want to stop the air
conditioner after you go to bed, and start it again in
the morning when you wake up or when you return
home.
Example:
DUAL TIMER
(Setting both ON and OFF timers simultaneously)
Start
10 hours later
after setting
TIMER OFF
TIMER ON OFF

Midea CR034-RG36F Specifications

General

Brand	Midea
Model	CR034-RG36F
Category	Air Conditioner
Language	English