26 32808001101
Specifications subject to change without notice.
DIAGNOSIS AND SOLUTION
EEPROM Parameter Error Diagnosis and Solution (E0/F4)
Error Code E0/F4
Malfunction decision conditions Indoor or outdoor PCB main chip does not receive feedback from the EEPROM chip.
Supposed causes
S Installation mistake
S PCB faulty
Troubleshooting
Yes
Replace the indoor/outdoor
main PCB.
Power off, then restart the
unit 2 minutes later.
EEPROM: A read−only memory whose contents can be erased and reprogrammed using a pulsed voltage. For the EEPROM chip location, please
refer to Fig 30 and Fig. 31.
Fig. 30 - Indoor PCB
Fig. 31 - Outdoor PCB
NOTE: The two pictures above are for reference only and they may differ from the actual unit.
To Next Page
Loading...
Need help?
General
