EasyManuals Logo
Home>Midea>Washer>FP-90LTL065GETM-N2

Midea FP-90LTL065GETM-N2 User Manual

Midea FP-90LTL065GETM-N2
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
10
18
.
MAINTENANCE
Before your maintenance starts, please unplug the machine and close the tap.
Cleaning the cabinet
Proper maintenance the washing machine can extend its
working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is
any water overflow, use wet cloth to wipe it off immediately.
No sharp items are allowed.
of
a
Formic acid and its diluted solvents or equivalent are forbidden, such as
solvents or chemical products ,etc.
alcohol,
Warning!
Note!
Cleaning And Care
Cleaning the inlet filter
• Inlet filter must be cleaned if pressure of water from the inlet drops.
Washing the filter in washing machine:
1.
Screw off the inlet pipe from the of the
machine.
2.Pull out the filter with ong nose
pliers and reinstall it back after being
washed.
3.Use to clean the filter.
4.Reconnect the inlet pipe.
the
back
a pair of l
a brush
Note!
1.There is a built-in lint lter in your washer. It
can help to collect lint during washing cycle.
2.It is suggested to clean the lint filter every
10 cycles.
3.Take it out and clean the filter with water.
Then place it back into the washer.
Lint lter cleaning

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midea FP-90LTL065GETM-N2 and is the answer not in the manual?

Midea FP-90LTL065GETM-N2 Specifications

General IconGeneral
BrandMidea
ModelFP-90LTL065GETM-N2
CategoryWasher
LanguageEnglish

Related product manuals