2.5 启动
冰箱首次启动请静置半小时后再插上电源。
在装入新鲜或冷冻食品前，先让冰箱运行2~3小时；夏季环境温度较高，
应先让冰箱充分运行4小时以上。
为保障开门顺畅及抽屉等取出方便，请留出足够的空间。
以上图片仅供参考，实际配置以购买实物或销售商声明为准
2.6 节约能耗提示
见英文部分
2.4 灯部品更换
见英文部分
第
8
页
8
2.5 Starting
Before initial start, keep the refrigerator still for half an hour
before connecting it to power supply.
Before putting any fresh or frozen foods, the refrigerator shall have run
for 2-3 hours, or for above 4 hours in summer when the ambient
temperature is high.
Spare enough space for convenient opening of the doors and drawers.
The picture above is only for reference. The actual configuration will
depend on the physical product or statement by the distributor
2.6 Energy saving tips
The appliance should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance. Overloading
the appliance forces the compressor to run longer. Foods that freeze too slowly may
lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the
appliance. This cuts down on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper
toweling. Liners interfere with cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
2.4 the LightChanging
Any replacement or maintenance of the LED lamps is intended to be made by
the manufacturer, its service agent or similar qualified person.
1557mm
130°
890mm
740mm
1557mm
130°
890mm
740mm
To Next Page
Loading...
Need help?
General
