（以上图片仅供参考，实际配置以购买实物或销售商声明为准）
2.3 门体调平
1）操作前提示：
在尝试操作配件之前，必须保证电器不接通电源。
在调门体之前，请做好防护工作，以免造成人身伤害。
2）门体调平原理图
Left
Locking nut
Adjusting nut
wrench
List of tools to be provided by the user
Left
Locking nut
Adjusting nut
wrench
List of tools to be provided by the user
2.3 Levelling door
door
1） peration
Precautions before o :
Before operation of accessories, it shall be ensured that the refrigerator is disconnected from power.
Before adjusting the , precautions shall be taken to prevent any personal injury.
2）Schematic diagram of levelling the door body
7
第
7
页
a、
调整好后在逆时针调节lockin g nut 进行锁定；
b、 .冷藏门高：顺时针旋转adjusting nut调节，调整好后再逆时针调节lockin g nut 进行锁定
冷藏门低：先将 lockin g nut 顺时针旋转松开，再逆时针旋转adjusting nut调节，
3）调节步骤：
When the fridge door is low:
Open the door, use a wrench to loosen the lockin g nut and to rotate the adjusting nut anti-clockwise
to raise the height of the door. Once the doors are aligned, then tighten the locking nut by
rotating it anti-clockwise.
When the fridge door is high:
Open the door, use a wrench to rotate the adjusting nut clockwise to lower the
height of the door. Once the doors are aligned, then tighten the locking nutby
rotating it anti-clockwise.
To Next Page
Loading...
Need help?
General
