12
Setting both TIMER ON and TIMER OFF at the same time
(Combined Timer Function)
Keep in mind that the time periods you set for both functions
refer to hours after the current time. For example, say that
the current time is 1:00 PM, and you want the unit to turn
on automatically at 7:00 PM. You want it to operate for 2
hours, then automatically turn off at 9:00 PM.
Do the following:
1.
Press TIMER ON button. The last TIMER ON setting will
appear.
2. Press TIMER ON button repeatedly until “6.0 H” is
displayed on remote control. (6 hours after 1:00 PM,
which is 7:00 PM.)
3. Wait 3 seconds, and the TIMER ON function will be
activated.
4.
Then press TIMER OFF button. The last TIMER OFF
setting will appear.
5. Press TIMER OFF button repeatedly until “8.0 H” is
displayed on remote control. (8 hours after 1:00 PM,
which is 9:00 PM.)
6.
Wait 3 seconds, and the TIMER OFF function will be
activated.
To Next Page
Loading...
Need help?
General
