DM17-01.01.08en Light Commercial R410A on-off
44
1. Features
1.1 Easy Installation: Two air inlet styles (Bottom side or Rear side)
Air inlet from rear is standard for all capacity; air inlet from bottom is optional.
The size of air inlet frame from rear and bottom is same, it’s very easy to move the cover from bottom to
rear side, or from rear to the bottom, in order to matching the installation condition.
1.2 Slim Design
The industry Lowest height is designed to be fitted into tight roof spaces.
36K unit -300mm
1.3 Easy maintenance
Clean the filter (Optional, standard product without filter)
It is easy to draw out the filter from the indoor unit for cleaning, even the filter is installed in rear side or
bottom side.
Replace the motor or centrifugal fan
Remove the ventilated panel firstly. Remove a half of blower housing and take out the motor with
centrifugal fan. Directly remove two bolts, and then replace the motor or centrifugal fan easily.
Air intake from rear (Standard)
Air intake from bottom (Optional)
Motor
Blower Housing
Ventilated Panel
To Next Page
Loading...
Need help?
General
