39
Safety Parts and Start Up
Guide
Dishwasher
Loading
Dishwasher
Use
Dishwasher
PROBLEM SOLUTION
Spotting and
filming on dishes
(cont.)
Detergent is too old. Detergent must be fresh and
detergent in a cool, dry area.
pressure is too low
to fill dishwasher
should be 20 to 80 psi
dishwasher fill. A booster
can be added if pressure is
too low.
Silica film or
etching
Using too much
detergent
less detergent, but do not
per load.
(65°”C).
Black or gray
marks on dishes
Aluminum items
rubbing dishes
during washing.
Disposable
aluminum items
can break down in
the dishwasher and
cause marking.
Hand wash aluminum items.
cleaner.
Orange stains
on plastic dishes
or dishwasher
interior
Large amounts of
on dishes placed in
the dishwasher.
PROBLEM SOLUTION
completely dry
NOTE: Plastics
often need towel
drying.
Dishes are not
loaded properly
Place glasses and cups in
surface is slanted to allow
Rinse Aid not used
or dispenser is
Use a liquid rinse aid to
speed drying and keep the
dispenser full.
Used an air dry
or energy-saving
option.
Dry option.
To Next Page
Loading...
Need help?
General
