40
Safety Parts and Start Up
Guide
Dishwasher
Loading
Dishwasher
Use
Dishwasher
DISHES ARE DAMAGED DURING A CYCLE
PROBLEM SOLUTION
NOTE: Some types of
hand.
Dishes not loaded
glasses so they are
stable and will not strike
together from washing
action.
Moving the rack
in or out of the
dishwasher too
Minimize chipping by
moving the rack in and
When the dishwasher fails, there will be the following prompts:
1.
2.
3.
The indicator lights on the operation panel will continue to flash, and
different combinations of lighting indicate different faults, refer to the
following table:
You will hear a prompt tone from the machine for a few seconds.
The indicator light on the outer door will continue to flash "white
light-blue light" alternately.
Code Meanings Cause Solution
E1
turned on to the
dishwasher. Verify
supply must
pressure between
sufficient flow.
E4
leak sensor
Too much
tub or a leak.
First, turn off
dishwasher. Check
in the filter. If
Incorrect water
fill amount
Low or No
water flow, or
too much water
flow during
filling process.
Rinse light
flashing.
Normal light
flashing.
To Next Page
Loading...
Need help?
General
