Product Function Description
1.Power on: The kettle is placed on the base, the display screen is bright for
1 seconds, long noise for 1 seconds, then the water temperature is
displayed, enter standby;
2.One-button boiling: Standby and non-temperature setting state (i.e.
display the actual water temperature), press the power button (Start), boil
water to 100 degrees and then enter standby state. In the process of
boiling water, the digital tube shows the real-time water temperature, lights
up 1, and the power lamp is always on.
3.Fixed temperature boiling water: set the temperature by setting key
(70-80-90-100-40-60 in order), light 1. Stand by and the temperature
setting state (that is, display the setting temperature), press the power
button (Start) to boil water to the setting temperature and then enter the
standby state. In the process of boiling water
, the digital tube shows the
real-time water temperature, lights up 1, and the power lamp is always on.
4.Heat preservation mode 1: Setting the temperature (70-80-90-100-40-60 in
sequence). (When the heat preservation mode is set first, the heat preser-
vation mode is maintained while setting the temperature, and the dots
above the digital tube are displayed accordingly.) Press the heat preserva-
tion mode to select the key, set the boiling water heat preservation mode
(100 heat preservation key is invalid), light 1 + 2. Stand by and the
temperature setting state (i.e. display the set temperature), press the
power supply key (Start) to start boiling water, boiling water reaches the
target temperature and enters the heat preservation state. At the same
time, the buzzer calls three times. During the heat preservation process,
the set temperature (1.0L-1.7L, +3/-3
, +1.0L-0.5L (excluding 1.0), +5/-5
) is maintained, and then the boiling water enters the shutdown state
after 60 +2/-2 minutes.(Temperature control and thermal insulation keys in
no sequence)
5.Heat preservation mode 2: Setting the temperature (70-80-90-100-40-60 in
sequence). (When the heat preservation mode is set first, the heat preser-
vation mode is maintained while setting the temperature, and the dots
above the digital tube are displayed accordingly.) Press the heat preserva-
tion mode to select the key, set the boiling water heat preservation mode
(100
heat preservation key is invalid), light 1 + 2 + 3.
7
To Next Page
Loading...
Need help?
General
