33
•
Press the Delay button repeatedly to select the delay time you want.
The delay start time, in hours, will be shown on the display, in sequence,
from 0 to 24, then back to 0. You can also press and hold the Delay
button to quickly adjust the time until the desired time appears on the
display.
•
If you want to change the wash cycle settings while you are setting the
delay start time, turn the cycle selector. To return to setting the delay
start time function, repeat Steps 1 and 2.
•
•
To cancel the delay start time function before you save the setting,
press the Delay button until 0 appears on the display, or turn the cycle
selector knob.
6. Start your washer
Press the Start Pause button.
NOTE:
•
•
•
•
•
Once the number of delay hours is reached by pushing the Delay
button, release the button for three seconds and it will be set. The
delay light will remain on.
After the delay time is set, if you wish to change the delay setting,
press the Delay button again until the desired hour is reached.
Release the button for three seconds and it will be set.
If you decide to cancel the delay setting, you can either turn the
cycle selector or push the Delay button until 0 is reached.
Ideally, you should set your cycle before setting the Delay, because
turning the cycle selector after the delay is set cancels the delay.
The Delay Start Time cannot be changed after the program has
started.
NOTE:
•
•
•
If you have not set a delayed start time or if the delay time has
expired, your washer starts the cycle and the Wash light turns on.
As your washer moves from stage to stage in the wash cycle,
the related light turns on (such as Rinse or Spin).
If you set a delayed start time, the Delay light turns on and your
washer starts counting down the start time.
IMPORTANT:
•
•
You can change settings or cancel the delay start time function
anytime before you press the Start Pause button by turning the
cycle selector. The delay start time cannot be changed after you
press the Start Pause button.
If you pressed the Start Pause button, you can cancel the delay
start time function by pressing the Power button to turn off your
washer, then pressing the Power button again to turn it back on.
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troubleshooting
To Next Page
Loading...
Need help?
General
Weight and Dimensions
