EasyManuals Logo
Home>Midea>Air Conditioner>MSG-24HRN2

Midea MSG-24HRN2 User Manual

Midea MSG-24HRN2
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Service manual
- 27 -
10.4 Protection
10.4.1 3 minutes delay at restart for compressor.
10.4.2 Sensor protection at open circuit and breaking disconnection
10.4.3 Fan Speed is out of control. When Indoor Fan Speed is too high(higher than High
Fan+300RPM)or too low(lower than 400RPM), the unit stops and LED displays failure information
and can’t returns to normal operation automatically.
10.4.4 Cross Zero signal error warning. If there is no Cross Zero signals in 4 minutes, the unit stops
and LED displays failure information and can’t returns to normal operation automatically.
10.4.5 The current protection of the compressor
10.5 Fan only mode
Fan speed is high/mid/low/ Auto
10.6 Cooling mode
The 4-way valve is closed at cooling mode.
The action of the compressor and the outdoor fan:(T=indoor temperature)
Auto fan at cooling mode:
Anti-freezing control to indoor evaporator at cooling mode ( T: evaporator temp. )

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midea MSG-24HRN2 and is the answer not in the manual?

Midea MSG-24HRN2 Specifications

General IconGeneral
BrandMidea
ModelMSG-24HRN2
CategoryAir Conditioner
LanguageEnglish

Related product manuals