1.Disconnects the power or t ake off the power plug.
2.Exhaust method
A.Quick opening method
Slide the exhaust valve to the exhaust position until the float valves falls. (for non-fluid food)
Put a wet towel on the cover to quicken cooling until the float valve falls. (for non-fluid food)
B.General opening method
Have the pressure cooker to cool naturally, until the float valve falls.
3.Open the cover
Hold the cover handle firmly, turn the cover clockwise to the spacing edge, and pull up the cover.
Do not open the cover until pressure inside the spot is released adequately.
Never pull out the exhaust valve when it is exhausting.
For fluid foods (porridge and sticky liquid), do not slide the exhaust valve for exhaust when
cooking is just finished, and otherwise the food will eject from the exhaust valve core. Be sure
to disconnect the power supply, have the unit cool naturally or put a wet towel around the cover
to speed up cooling until the float falls, and finally open the cover.
When large quantity of food is cooked, do not exhaust immediately after cooking. It is
recommended to open the cover and have the food after some time of warm-keeping.
Function Selection
General Functions
1.Finish cooking preparation according to Page 6
2.Switch on
The nixie tube flashes and displays a red horizontal
line “---
”, indicating that the electric pressure cooker
has entered preparation state;
3.Select a required function level
4.
program selected.
Press a function key, and then10s later, the electric pressure cooker will perform a corresponding function
5. After cooking, enter the warm-keeping state automatically
After cooking, a corresponding function indicator goes out, the warm indictor illuminates , the display
screen shows “0.0”, and gives out the prompt sound.(10 beeps), with the electric pressure cooker going
into warm state.
Once a function key is pressed, the indicator of a corresponding
function level will illuminate (red);
Cooking time varies with different function level. The bigger the
food amount, the longer the cooking time.
You can cancel current working state and
return to standby state by pressing the
“Keep Warm/Cancel” key.
During operation, the machine may
sometimes generate the “cluck” sound,
which is not malfunction.
For cooking of little amount, the inner pot
may be sucked up when the cover is
opened. In this case, shake the inner pot
manually, and remove the inner pot cover
after the inner pot falls into the cooker body.
Warm Tips:
Safe Cover Opening
07
Within 10s, you can re-select preset time and function level, and finally confirm that the electric
pressure cooker will start work in 10s after selection.
The red horizontal line “---” on the display screen is bright, indicating that the electric pressure
cooker has entered working state.
During the operation, you can cancel current working state and return to standby state by pressing
the “Keep Warm/Cancel” key.
To Next Page
Loading...
Need help?
General
