Midea YL1632S-W User Manual

11
Operation Panel
OPERATION INSTRUCTIONS
Power Indicator
Light
●
Cooling Indicator
Light
●
●
●
Heating Indicator
Light
No.1
No.3
No.2
Description
Plug cord into a properly grounded wall outlet, turn
on the heating switch, the heating pilot lamp is on
when heating is in progress, and o when heating has
been completed; the heating pilot lamp is o and
stop heating when turn o the heating switch;
Plug cord into a properly grounded wall outlet, turn
on the cooling switch, the cooling pilot lamp is on
when cooling is in progress, and o when cooling has
been completed; the cooling pilot lamp is o and
stop cooling when turn o the cooling switch;
Plug cord into a properly grounded wall outlet, the
power pilot lamp is on, and o when unplug;
Dispensing Water
Dispensing Cold Water
Cooling water is ready after 3 hours for the 1 install. The compressor will work again
and you have to wait until the cooling light is o. During this time the compressor could
run continuously. This is normal.
1. Position bottle, glass, pitcher or cooking pot below tap.
2. Depress cold water button downward to start cold water flow.
3. Release button once desired fill level is achieved.
st
YL1632S-W
1
2
3
YL2037S-B
1
3
2
Round Indicator
Light
Plug the power supply cord into a wall outlet, the
power pilot lamp will light up and will go o when
the unit is unplugged.
If the machine is powered on, you don't need the
round indicator light, you can turn o the round
indicator light switch on the back of the machine.

Midea YL1632S-W Specifications

General

Brand	Midea
Model	YL1632S-W
Category	Water Dispenser
Language	English