Connecting the hoses
Connecting the hoses to the washing
machine
^ Take the 6 screws out of the bag.
^
Unscrew the cover cap on the rear of
the washing machine.
^
Keep both screws as you will need
these to secure the hoses.
^
Note the diameter at the end of the
hoses, to ensure you insert the
correct hose to the washing machine.
Tip to make fitting easier
: Moisten the
hose seals with water or suds solution
beforehand.
^ Press each hose using some force
into its appropriate opening and
secure with the screws supplied.
Connecting the hoses to the
dispensing unit
^
Note the diameter at the end of the
hoses, to ensure you insert the
correct hose to the dispensing unit.
Installation and connection
9
To Next Page
Loading...
General