Miele B 1847 User Manual

^
Turn the screw cap on the back of
the water container anti-clockwise
and lift it off.
^ Tilt the water container into a
horizontal position and fill it with fresh
tap water (approx. 15 °C to 35 °C). In
this position even very low taps can
be used to fill the water container. It
is not possible to overfill the water
container.
The water container can be removed
and refilled at any time during the
ironing process. The amount of water
required will depend on how much
laundry is being ironed.
^
Replace the screw cap and turn
clockwise as far as it will go it.
^
Replace the water container.
The k indicator light will go out after a
short time.
The steam will be ready for use again
more rapidly if the water container is
refilled promptly.
If you refill and replace the water
container as soon as the indicator light
k lights up, there is no delay. The *
indicator light indicates readiness
immediately.
While the k indicator light is on, the
steam system is not active.
The iron remains functional.
Energy-saving tip: You can save energy
by ironing without steam by removing
the water container, so that the steam
generator is not heated.
Empty the water container if the system
is not going to be used for a long
period.
Switching on
24

Miele B 1847 Specifications

General

Iron power	- W
Product color	Black, White
Soleplate type	-
Water tank capacity	1.25 L
Maximum steam pressure	4 bar
Steam boost performance	- g/min
Vertical steam function	Yes
Continuous steam performance	100 g/min
Connected load	2200 W