CoolDown function
If the iron is not moved for more than 3
minutes, the heating switches off.
After some time steam is no longer
available and the * indicator light goes
out.
The iron will start heating up again
automatically as soon as the iron is
moved.
The time taken for the steam to be
available again depends on the length
of time the heating was switched off.
When the appliance is ready and steam
is available, the * indicator light comes
on.
Do not leave the system unattended
with the iron or steamer connected.
Always switch the appliance off and
disconnect it from the electricity
supply before leaving it.
Auto-Off function
If the iron or steamer is not used for a
total of more than 14 minutes, the whole
appliance switches off automatically.
The system is switched back on again
by pressing the s button.
Switching on
26
To Next Page
Loading...
Need help?
General
