Name: Miele Complete C2 Tango EcoLine
Brand: Miele
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily

remedied. Time and money will be saved because a service call will not be

needed.

The following guide may help you to find the reason for a malfunction or a fault,

and to correct it.

Problem Cause and remedy

The vacuum cleaner

switches off automatic-

ally.

A temperature limiter switches the vacuum cleaner off

automatically if it gets too hot.

This can occur if, for instance, large articles block the

suction tube or when the dustbag is full or contains

particles of fine dust. A heavily soiled exhaust or dust

compartment filter can also be the cause of overheat-

ing.

 Switch the vacuum cleaner off immediately using

the On/Off foot control . Switch off at the wall

socket and unplug it.

After removing the cause, wait for approximately 20 -

30 minutes to allow the vacuum cleaner to cool down.

It can then be switched on again.

Questions and Answers:

Need help?

Do you have a question about the Miele Complete C2 Tango EcoLine and is the answer not in the manual?

Miele Complete C2 Tango EcoLine Specifications

General