User profile drinks
The User profile function is used to
select the quantity of water and milk for
your drink, as well as the fineness of the
ground, temperature and pre-brewing
to suit your taste and that of your
guests (see "Setting up user profiles").
If you have set the machine up for a
specific user profile you must first
select the user profile required and
then the type of drink.
User profile
qrHI J L
n
m C
^ Touch the right arrow to highlight the
User profile symbol and then touch
the OK sensor.
^ Select "Select" with the arrow sensors
and touch the OK sensor.
^ Select the user profile you want with
one of the arrow sensors and touch
the OK sensor.
A large user profile symbol n
will now appear in the
display to show that a user
profile has been selected.
This function operates in the same
way as a standard profile.
After use
If you have made a drink with milk, the
following message appears in the
display after two minutes:
i Start the rinsing
programme
OK
^
Touch the OK sensor.
The milk pipework will now be rinsed.
Even if you do not confirm the
message with "OK", the coffee
machine will automatically rinse the
milk pipework after a few minutes.
Before switching the machine off for
any length of time, the pipework, brew
system, spouts and milk pipework need
to be cleaned (see "Cleaning and care:
Rinse the system" and "Clean milk
pipework").
Making drinks
24
To Next Page
Loading...
Need help?
General
Weight and Dimensions
