Miele CVA 5060 User Manual

Programming the amount for
hot water via the Hot water
sensor
^
Place the appropriate cup for the
amount you want to programme
under the hot water spout.
^
Touch the Hot water sensor until
"Prog. the amount" appears in the
display.
^
Once sufficient water has flowed into
the cup and "Save" shows in the
display touch the Hot water sensor
again.
Each subsequent portion of hot water
will then have the same amount.
Programming the amount via
"Settings"
^
Select "Settings F" from the Main
menu, and then touch the OK sensor.
Settings
Prog. the amount
Amount of coffee
^
Use the arrow sensors to highlight
"Prog. the amount", and then touch
the OK sensor.
^
Use the arrow sensors to select the
drink you wish to set the amount for.
^ Select "Start" and touch the OK
sensor.
The procedure is now the same as for
programming the amount using the OK
sensor or the Hot water sensor.
Programming the amount: setting the portion sizes
43

Miele CVA 5060 Specifications

General

Type	Coffee/Espresso
Product type	Espresso machine
Capacity in cups	15 cups
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Appliance placement	Built-in
Water tank capacity	2.3 L
Coffee beans capacity	500 g
Adjustable coffee strength	Yes
Maximum operating pressure	15 bar
Cord length	3 m
Product color	Black, Stainless steel
Housing material	-
AC input voltage	220–240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	480 mm
Width	595 mm
Height	455.5 mm
Installation compartment depth	500 mm
Installation compartment width	560 mm
Installation compartment height	450 mm