Miele CVA 5060 User Manual

Rinse the system
Before switching the machine off for
any length of time, the pipework, brew
system and central spout need to be
cleaned.
If you have switched the automatic
rinsing function off, you will need to
rinse the system through manually.
Place the smaller of the two containers
under the central spout.
Maintenance
qrHI J L n
m
C
^ Touch the right arrow sensor to
highlight the maintenance symbol
and touch the OK sensor.
^ Select "Rinse the system" and touch
the OK sensor.
^ Select "Start" and touch the OK
sensor.
The main menu will reappear in the
display after the pipework has been
rinsed. The machine can then be
switched off.
Milk pipework
All parts of the milk system need to
be cleaned thoroughly and
regularly.
Milk contains bacteria which
proliferate rapidly with inadequate
cleaning. A dirty machine can be
harmful to health.
Rinse milk pipework
To prevent milk going off in the
machine and the pipework getting
clogged up, it should be rinsed
through after use. Rinsing is not a
substitute for cleaning the pipework
at the end of the day.
Maintenance
qrHI J L n
m
C
^ Touch the right arrow sensor to
highlight the maintenance symbol
and touch the OK sensor.
^
Select "Rinse milk pipework" and
touch the OK sensor.
^
Select "Start" and touch the OK
sensor.
Follow the instructions in the display.
Cleaning and care
49

Miele CVA 5060 Specifications

General

Type	Coffee/Espresso
Product type	Espresso machine
Capacity in cups	15 cups
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Appliance placement	Built-in
Water tank capacity	2.3 L
Coffee beans capacity	500 g
Adjustable coffee strength	Yes
Maximum operating pressure	15 bar
Cord length	3 m
Product color	Black, Stainless steel
Housing material	-
AC input voltage	220–240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	480 mm
Width	595 mm
Height	455.5 mm
Installation compartment depth	500 mm
Installation compartment width	560 mm
Installation compartment height	450 mm