Miele CVA 6401 User Manual

Filling the water tank
22
 Risk to health due to contami-
nated water.
Bacteria can develop in water which
has been sitting in the water con-
tainer for too long and is a risk to
your health.
Change the water in the water con-
tainer every day.
 Risk of damage due to incorrect
operation.
Unsuitable liquids such as hot or
warm water or other liquids can
damage the coffee machine.
Carbonated water leaves too much
limescale in the coffee machine.
Only use cold, fresh tap water to fill
the water container.
 Open the appliance door.
 Pull the water tank forwards to re-
move it.
 Take off the lid and fill the water tank
with fresh, cold tap water up to the
“max.” mark.
 Push the water tank back in the ma-
chine until it clicks into place.
If the water tank protrudes slightly or
is a little high, check whether the sur-
face that the water tank sits on is dirty.
If the water tank is not positioned cor-
rectly, the outlet valve will not connect
properly and could leak. Clean the
surface, if necessary.

Miele CVA 6401 Specifications

General

Product type	Espresso machine
Capacity in cups	- cups
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Built-in
Water tank capacity	2.3 L
Coffee beans capacity	500 g
Adjustable coffee strength	Yes
Reservoir for brewed coffee	-
Cord length	2 m
Control type	Sensor
Product color	Black
AC input voltage	220–240 V
Power consumption (max)	2800 W

Weight and Dimensions

Depth	487 mm
Width	595 mm
Height	452 mm
Installation compartment depth	500 mm
Installation compartment width	568 mm