Checking the programmed water
hardness level
^
Switch the dishwasher off with the Off
button o.
^
Press the programme selector button
in, and whilst holding it in switch
the dishwasher on using the On
button g.
Keep the programme selector button
pressed in for at least four seconds
until the lower right hand programme
indicator comes on.
^
Press the programme selector button
twice briefly.
The upper right hand programme
indicator will flash for the number of
times which corresponds to the water
hardness level which has been set (see
chart).
^ Switch the dishwasher off with the Off
button o.
Before using for the first time
15
To Next Page
Loading...
Need help?
General
