Switching on
^
Open the stopcock, if it is closed.
^
Open the door.
^
Make sure the spray arms are not
obstructed.
^
Switch the dishwasher on using the
On button g.
The On indicator light g comes on.
Selecting a programme
Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the programme
chart later on in this booklet.
Starting a programme
^
Select the programme required using
the programme selector button.
The indicator light next to the selected
programme will come on.
^
Close the door.
The programme cycle will begin.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
Operation
31
To Next Page
Loading...
Need help?
General
