EasyManuals Logo

Miele G 1180 Vi User Manual

Miele G 1180 Vi
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Programming the water hardness
level
Each time a button is pressed one of
the indicator lights will flash and light
up in the control panel. However, only
the indicator lights mentioned in the
following programming process stages
are significant.
The programming procedure can be
cancelled at any time by pressing the
Off button o. The procedure can
then be re-started from the beginning
again.
^ Switch the dishwasher off with the Off
button o.
^ Press the programme selector button
in, and whilst holding it in switch
the dishwasher on using the On
button g.
Keep the programme selector button
pressed in for at least four seconds
until the lower right hand programme
indicator comes on.
If this does not happen, start the
procedure from the beginning again.
^
Press the programme selector button
twice briefly.
The "Inlet/Drain" check light will flash
twice briefly at intervals, and the upper
right hand programme indicator will
flash 4 times briefly at intervals (factory
setting).
^
Press the programme selector button
for at least one second until the
"Inlet/Drain" check light comes on.
The number of times the upper right
hand programme indicator flashes tells
you the water hardness level which has
been set (see chart).
°d mmol/l °f Flashing
1 - 4 0.2 - 0.7 2- 7 Once briefly
5 - 7 0.9 - 1.3 9- 13 Twice briefly
8 - 11 1.4 - 2.0 14- 20 3 times briefly
12 - 15 2.2 - 2.7 22- 27 4 times briefly
16 - 20 2.9 - 3.6 29- 36 5 times briefly
21 - 25 3.8 - 4.5 38- 45 6 times briefly
26 - 30 4.7 - 5.4 47- 54 7 times briefly
31 - 36 5.6 - 6.5 56- 65 8 times briefly
37 - 45 6.7 - 8.1 66- 80 9 times briefly
46 - 70 8.3 - 12.6 82-125 Once for longer
^ Press the programme selector button
briefly to select the number of flashes
which equates to your water
hardness level.
Each press of the button moves you
up a level. When the highest water
hardness level is reached, the setting
starts from the beginning again.
Example:
If your water hardness level is
4.0 mmol/l (22 °d), the upper right
hand programme indicator should
flash briefly six times at intervals.
^
Switch the dishwasher off with the Off
button o.
Before using for the first time
14

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele G 1180 Vi and is the answer not in the manual?

Miele G 1180 Vi Specifications

General IconGeneral
BrandMiele
ModelG 1180 Vi
CategoryDishwasher
LanguageEnglish

Related product manuals