Turning on
^ Make sure the spray arms can rotate
freely.
^ Close the door.
^ Open the water supply, if closed.
^ Turn the dishwasher on "s".
The "Start/Stop" indicator flashes and
the indicator of the last program run
lights up.
Selecting a program
Choose your program according to the
type of load and soiling.
The "Program guide" describes the
programs and use.
Starting a program
^ Select the desired program with the
"Program" button.
The indicator of the selected program
lights up.
^ Press the "Start/Stop" button.
The program starts. The indicators
"Start/Stop", "Rinse" and the last
selected program light up.
Cancel a program only within the
first few minutes. Otherwise
important program steps could be
interrupted.
Program sequence display
After a program has been started the
current stage of the program is
indicated by the program cycle
indicator.
Use
26
To Next Page
Loading...
Need help?
General
