Default settings
All settings can be reset to the factory
default.
^ Turn the dishwasher off "s".
^ Press the "Start/Stop" button and at
the same time turn the dishwasher on
"s". Hold the "Start/Stop" button until
the "Start/Stop" indicator comes on.
If it does not come on, start over.
^ Press the "Program" button 12 times.
The bottom program indicator flashes
once long and twice short in intervals.
The "Rinse" indicator shows if a setting
was changed.
– The "Rinse" indicator flashes:
All settings are the factory default.
– The "Rinse" indicator is off:
At least one setting was changed.
^ To reset the dishwasher to the default
settings, press the "Start/Stop" button.
^ Turn the dishwasher off "s".
Additional options
29
To Next Page
Loading...
Need help?
General
