Cleaning the control panel
,
Do not use abrasive cleaning
agents, glass cleaning agents or
all-purpose cleaners. Because of
their chemical composition, they
could cause serious damage to
surfaces.
^
This should only be wiped with a
damp cloth.
Cleaning the door front
,
Do not use any cleaning agents
containing ammonia or thinners.
These would damage the surface
structure.
^
Clean the front using a Miele E-Cloth
or with a suitable cleaning agent for
the type of material the front is made
of. Follow the manufacturer's
instructions.
^
Door fronts made from wood should
only be cleaned using a damp cloth,
and then dried with a soft cloth.
^ Door fronts made of stainless steel
should be cleaned using a damp
cloth and a little washing up liquid, or
a proprietary non-abrasive cleaning
agent designed specifically for use
on stainless steel.
^ To help prevent re-soiling, a
proprietary conditioning agent for
stainless steel, such as Neoblank
(available from the Miele UK Spare
Parts Department) can also be used.
Follow the manufacturer's instructions
on the label and apply sparingly with
an even pressure following the
direction of the grain.
Cleaning and care
42
To Next Page
Loading...
Need help?
General
