Interrupting a program
A program is interrupted as soon as the
door is opened. If the door is closed,
the program will continue from where it
was interrupted.
,
Open the door with care. The
water in the dishwasher is hot.
Danger of scalding. Before closing
the door again, leave it ajar for
approx. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks into place.
Changing a program
If the detergent flap is already open,
do not change the program.
If a program has already started and
you wish to change it:
^
Open the door.
^
Press the "o" button.
^
Press the "g" button.
^
Select the desired program with the
program button.
^ Close the door.
The optical control lights. The program
starts.
Use
32
To Next Page
Loading...
Need help?
General
