With the aid of the following guide, minor problems can be fixed without a service call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Issue Possible fault Fix
The program does not
start.
The door is not
properly closed.
Close the door firmly.
The machine is not
plugged in.
Insert the plug.
The fuse is defective
or the breaker has
tripped.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
The dishwasher is
not turned on.
Press "g" and select a
program.
The dishwasher stops
during a program.
The fuse has
tripped.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
The optical indicator is not
visible when a program
has started.
The reflector was
not properly
installed.
Install the reflector properly,
see Installation sheet.
Frequently asked questions
36
To Next Page
Loading...