Miele G 2832 User Manual

Do not fill the salt reservoir with
water.
^ Add salt only until the reservoir is full
or until water runs out of the opening.
The salt reservoir holds approx. 1 kg
of salt, depending on the brand
used.
Do not add any more than 1 kg of
salt.
As the salt reservoir is filled, displaced
water may overflow.
^
Clean any excess salt from around
the reservoir opening, and then close
the flap.
^
Run the Quick wash programme im
-
mediately (without any crockery in
the dishwasher, and without selecting
the Turbo extra option) to remove any
traces of salt from the cabinet.
"Insufficient salt" message
^
Fill the salt reservoir with dishwasher
salt for reactivation when the
Insufficient salt message appears.
(If it appears during a programme,
wait until the end of the programme).
^
Confirm with
OK.
The "Insufficient salt" message will go
out.
After the salt reservoir has been filled,
the "Insufficient salt" message may still
appear in the display if the salt
concentration has not yet reached the
correct level.
If this is the case, confirm again with
OK.
,After refilling the salt reservoir,
run the Quick wash programme im-
mediately (without any crockery in
the dishwasher, and without
selecting the Turbo extra option) to
remove any traces of salt from the
cabinet.
In the UK, Miele branded dishwasher
salt is available from the Miele Spare
Parts Department or via the internet
on www.miele.co.uk.
Before using for the first time
19

Miele G 2832 Specifications

General

Brand	Miele
Model	G 2832
Category	Dishwasher
Language	English