Control panel
a Information sensor pad K
For displaying additional information
about the menu being displayed.
b On/Off sensor pad s
For switching the appliance on and
off.
c Selector sensor pads
For selecting the option displayed
next to them.
For altering the values displayed
(+/-).
For navigating to further screens.
d Display
See next page for more information.
e Stand-by indicator light
When the dishwasher is switched on,
the indicator light comes on if the
display is switched off.
f Clear sensor pad <
For navigating back to the previous
menu or deleting values which have
been set previously.
g PC interface
Used by service technicians to run
diagnostic checks on your
appliance, or to update
programming data in the future.
This instruction book applies to several different dishwasher models.
The specific dishwasher models below are referred to as follows:
G 1832 etc. = G 1XXX
G 2832 etc. = G 2XXX
The model numbers G 1XXX and G 2XXX used in this book refer to the model
designation specified on the data plate of the appliance (and not the
description on the control panel).
The data plate is located at the top right hand side of the door.
Guide to the appliance
6
To Next Page
Loading...
Need help?
General
