Cleaning the spray arms
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be inspected
and cleaned regularly (approx. every
4 - 6 months).
^
Switch the dishwasher off.
Remove the spray arms as follows:
^
Take out the cutlery tray (if your
dishwasher is fitted with one).
^
Push the top spray arm upwards to
engage the inner ratchet. Then
unscrew the spray arm.
^
Push the middle spray arms upwards
a to engage the ratchet. Then
unscrew the spray arm b.
^
Remove the lower basket.
^ Pull the lower spray arm firmly
upwards to remove it.
^
Use a pointed object to push food
particles into the spray arm jets.
^
Rinse thoroughly under running
water.
^
Replace the spray arms and check
that they rotate freely.
Cleaning and care
45
To Next Page
Loading...
Need help?
General
