Operation
44
Display of programme running
time
The duration of the programme selected
appears in hours and minutes in the
display before the programme begins. If
the door is opened during the pro-
gramme sequence, the time left until
the end of the programme is displayed.
The displayed duration may vary for the
same programme. It is influenced by,
for example, the temperature of the in-
coming water, the reactivation cycle of
the water softener, the detergent type
and the amount of crockery and how
soiled it is.
When a programme is selected for the
first time, the display will show the aver-
age running time for a cold water con-
nection.
The running times shown in the “Pro-
gramme overview” chapter refer to
standard test loads and temperatures.
For each programme sequence, the
control module calculates the pro-
gramme running time according to the
temperature of the water taken into the
dishwasher and the size of the load.
Starting the programme
Start the programme by closing the
door.
Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
To Next Page
Loading...
Need help?
General
