Miele G 5050 User Manual

Programme options
55
Buzzers
A buzzer sequence will sound at the
end of the programme or if there is a
fault.
The buzzers at the end of a programme
and the alarm tone in the event of a
fault will sound 4times at intervals with
a short pause between each set.
The buzzers are switched off as stand-
ard.
You can switch on the buzzers that
sound at the end of a programme if you
wish. The alarm tone that sounds in the
event of a fault is always switched on.
 Open the door.
 Switch the dishwasher off with the
button, if it is switched on.
 Press the button in and, whilst
holding it in, switch the dishwasher
on using the button.
Keep the button pressed in for at
least 4seconds until the indicator
light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
 Press the programme selection
button 4 times.
The top left programme indicator light
will flash rapidly 4 times at intervals.
The flashing sequence in the display
shows whether the buzzers at the end
of the programme are activated or de-
activated:
-  : Buzzers activated
-  : Buzzers deactivated
 Press the button to change the
setting.
The setting is now saved.
 Switch the dishwasher off with the
button.

Miele G 5050 Specifications

General

Brand	Miele
Model	G 5050
Category	Dishwasher
Language	English