Miele G 5050 - Options; Timer

Options
48
Timer
You can set the start time of a pro-
gramme. The programme start time can
be delayed for between 30minutes and
24hours.
With start time delays between
30minutes and 9hours 30minutes, the
delay can be set in 30minute stages. It
is set in hours for periods longer than
this.
With manual detergent dispensing,
the detergent will clump together if
the detergent compartment is not dry
and this may mean it is not fully
rinsed out.
When using the timer function, make
sure that the detergent compartment
is dry before adding detergent. Wipe
dry with a cloth first, if necessary.
Do not use any liquid detergents.
These can leak out.
 Danger to health due to deter-
gent.
To prevent children coming into con-
tact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the pro-
gramme, i.e. before you activate the
timer.
Activating the timer
 Open the door.
 Switch the dishwasher on with the
button.
 Select the programme you want to
use.
 Press the Timer button.
The most recently set time will be
shown on the time display. The
Timer indicator light will light up.
 Set the required time after which the
programme should start automatically
using the button.
If the button is pressed and held, the
time will increase automatically up to
hours. To start again with
:hours, press the button twice.
 Close the door.