Miele G 5280 User Manual

^
Remove the lower basket from the
wash cabinet and unscrew the salt
container lid.
When opening the salt container,
water will run out. Open the
container only to refill salt.
Important: The salt container must
be filled with 2 quarts (2 l) of water
before adding salt for the first time
so the salt can dissolve
properly. Water does not have to be
added with subsequent refills.First
fill the container with approx. 2 liters
of water.
^
Place the provided funnel over the
salt container and carefully fill it with
salt. The salt container holds
approx. 4.4 lbs (2 kg) of salt,
depending on the type of salt.
^
Clean any excess salt from the
threads of the container opening.
Screw the lid on firmly.
^
Immediately run the Express program
without a load (no Turbo function) to
remove any traces of salt or brine
from the wash cabinet.
Salt indicator
^
When the Salt indicator comes on,
refill the salt container.
The refill salt message may continue to
be displayed for a short time after salt
has been added. It will go out as soon
as a sufficiently high concentration of
salt has formed.
The Insufficient salt message is turned
off if you have programmed the
dishwasher to a water hardness below
4 °d (4 gr/gal).
,Immediately run the Express
program without a load (no Turbo
function) to remove any traces of
salt or brine from the wash cabinet.
Before using for the first time
14

Miele G 5280 Specifications

General

Brand	Miele
Model	G 5280
Category	Dishwasher
Language	English