Buzzer
A buzzer sounds at the end of a
program and when a fault occurs.
The buzzer at the end of a program
sounds four times in intervals with a
brief break in between.
The fault buzzer sounds four times in
intervals without pausing.
The buzzer is activated by default.
It can be turned off so that it does not
sound at the end of a program. The
buzzer for a fault cannot be turned off.
^ Open the door.
^ Press the K button to turn the
dishwasher off.
^ Press and hold the Program button
and simultaneously turn the
dishwasher on using the K button.
Keep the Program button pressed for
at least four seconds until the lower
right program indicator lights up.
If it does not come on, start over.
^
Press the Turbo button four times.
The Turbo indicator light shows 4 short
flashes in intervals.
The flashing in the time display shows
whether the program end buzzer is
turned on or off:
–
"p1": buzzer is on
–
"p0": buzzer is off.
^
Press the Program button if you wish
to change the setting.
The setting is immediately saved.
^ Press the K button to turn the
dishwasher off.
Additional options
39
To Next Page
Loading...
Need help?
General
